Application of Fire-Guard Coating Fire-Guard coating is typically applied to poles with a high pressure airless sprayer. A brush-on formula is also available for full applications or where repairs are needed.

A 1/8 inch wet coating is recommended from ground level to a minimum height of 3 to 4 feet, depending on brush height. An additional two to three feet of vertical pole surface above anticipated vegetation should be protected with a 1/16 to 1/8 inch coating.

​

• Fire-Guard should be applied to a clean surface. Remove vegetation, loose surface debris, excess preservative material.*

​

• Checks and minor pole damage can be effectively protected using Fire-Guard formulations.

​

• Fully cures in 24 hours.

*Bleeding poles may require a fiberglass substrate prior to applying FireGuard for the best long-term adhesion.